DS-2CD4165F-IZ

6MP Smart IP Indoor Dome Camera

    • 1/1.8” Progressive Scan CMOS
    • 6MP@24fps frame rate
    • Slow shutter
    • Digital WDR
    • 3D DNR
    • Audio/Alarm IO
    • Support 128G on-board storage
    • DC12V/PoE

 

Camera
Image Sensor:1/1.8″ Progressive Scan CMOS
Min. Illumination:0.01 Lux @(F1.2,AGC ON), 0.014 Lux @(F1.4,AGC ON), 0 Lux with IR
Shutter time:1s ~ 1/100,000s
Slow shutter:Support
Lens:2.8-12mm @ F1.4, 94.5°~30.5°
Auto Iris:DC drive
Day& Night:IR cut filter with auto switch
Wide Dynamic Range:Digital WDR
Compression Standard
Video Compression:H.264+/H.264/MJPEG
H.264 code profile:Baseline Profile / Main Profile / High Profile
Video bit rate:32Kbps~16Mbps
Audio Compression:G.711/G.722.1/G.726/MP2L2
Audio bit rate:64Kbps(G.711) / 16Kbps(G.722.1) / 16Kbps(G.726) / 32-128Kbps(MP2L2)
Image
Max. Image Resolution:3072 x 2048
Frame Rate:50Hz: 24fps (3072 × 2048), 25fps (3072 × 1728, 2560 × 2048, 2560 × 1920, 2048 × 1536, 1920 × 1080, 1280 x 720)
60Hz: 24fps (3072 × 2048), 30fps (3072 × 1728, 2560 × 2048, 2560 × 1920, 2048 × 1536, 1920 × 1080, 1280 x 720 )
Third Stream:Independent with Main Stream and Sub Stream, up to
50/60Hz: 10fps@4CIF
Image Enhancement:BLC/3D DNR/ROI/Defog
Image Settings:Saturation, brightness, contrast adjustable through client software or web browser
Distortion Correction:Support
Target Cropping:Support
Picture Overlay:LOGO picture can be overlaid on video with 128×128 24bit bmp format
Day/Night Switch:Auto/Schedule/Triggered by Alarm In
Network
Network Storage:NAS (Support NFS,SMB/CIFS), ANR
Alarm Trigger:Motion detection, tampering alarm, network disconnect , IP address conflict, storage exception
Protocols:TCP/IP, UDP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour
General Function:User Authentication, Watermark, IP address filtering
System Compatibility:ONVIF (Profile S, Profile G),ISAPI
Interface
Audio:1-ch 3.5 mm audio in (Mic in/Line in)/out interface
Communication Interface:1 RJ45 10M/100M/1000M Ethernet port, 1 RS-485 interface
Alarm:1 input, 1 output (up to DC24V 1A or AC110V 500mA )
Video Output:1Vp-p Composite Output (75 Ω, BNC)
On-board storage:Built-in Micro SD/SDHC/SDXC slot, up to 128 GB
Reset Button:Yes
Audio
Environment Noise Filtering:Support
Audio I/O:Support dual audio track, stereo
Audio Sampling Rate:16kHz / 32kHz / 44.1kHz / 48kHz
Smart Feature-set
Behavior Analysis:Line crossing detection, Intrusion detection, Region entrance, Region exiting, Unattended baggage, Object removal
Line Crossing Detection:Cross a pre-defined virtual line
Intrusion Detection:Enter and loiter in a pre-defined virtual region
Region Entrance:Enter a pre-defined virtual region from the outside place
Region Exiting:Exit from a pre-defined virtual region
Unattended Baggage:Objects left over in the pre-defined region such as the baggage, purse, dangerous materials
Object Removal:Objects removed from the pre-defined region, such as the exhibits on display.
Exception Detections:Scene change detection, Sudden audio increase/decrease detection, Audio loss detection, Defocus detection
Recognition:Face detection recognition
Statistics:Object Counting (Entrance and Exit object number is accounted and showed on screen in real time)
General
Operating Conditions:-30 °C ~ 60 °C (-22 °F ~ 140 °F)
Humidity 95% or less (non-condensing)
Power Supply:12 VDC ± 10%, PoE (802.3af)
Power Consumption:Max. 6~9W (IR lens 2W, Motorized lens 1 W)
Impact Protection:IK10
IR Range:Up to 30m
Dimensions:Φ 140 × 121.8 mm (Φ 5.51” × 4.80”)
Weight:1400 g (3.09 lbs)