FEATURES
Easy network setup
— EaZy Networking* service available to connect your camera to Internet
automatically in three steps
— Easy guide to connect your camera to Internet manually
with iPhone / iPad / Android devices
Network access via either a wireless IEEE 802.11 b/g/n
connection or a wired Ethernet connection to provide
flexible installation options
Push Video support to send an event notification
to your iPad, iPhone and Android mobile device immediately
once the specified event type is triggered, and play video recording once you confirm the receipt
1.3 Megapixel with HDTV 720p quality, allowing users to notice minor details more easily
White LED built-in to illuminate the scene manually, scheduled by a timer, or triggered by a motion, an
alarm, or an audio event
Micro SD card support (up to 64GB) for video storage
ONVIF standard supported to simplify system integration
External alarm I/O device connection
Microphone & speaker built-in for two-way audio transmission
Remote Surveillance
— Fully compatibility on iPhone & iPad, and Internet Explorer on Windows operating system
| ▓ Network | |
| LAN Port | YES |
| LAN Speed | 10/100 Based-T Ethernet |
| Wireless Interface | IEEE 802.11 b/g/n |
| Antenna Gain | 2dBi |
| RF Connector | Reverse SMA Plug |
| Supported Protocols | DDNS, PPPoE, DHCP, NTP, SNTP, TCP/IP, ICMP, SMTP, FTP, |
| HTTP, RTP, RTSP, RTCP,IPv4, Bonjour, UPnP, DNS, UDP, IGMP | |
| ONVIF Compatible | YES (Profile S) |
| Number of Online Users | 10 |
| (1) Multiple user access levels with password | |
| Security | (2) IP address filtering |
| (3) HTTPS encryption | |
| (4) WEP 64/128 bit, WPA/WPA2-PSK | |
| Remote Access | (1) Internet Explorer on Windows operating system |
| (2) EagleEyes on iPhone, iPad & Android mobile devices | |
| ▓ Video | |
| Video Compression | H.264 / MPEG4 / MJPEG |
| Video Resolution | SXGA, 720P, VGA, QVGA |
| Frame Rate | NTSC:30, PAL:25 |
| Multiple Video Streaming | 3 (H.264, MJPEG, MPEG4) |
| (Encode Modes, IPS, Resolution) | |
| ▓ Camera | |
| Image Sensor | 1/4″ SONY H.R. image sensor |
| Min Illumination | 0.1 Lux / F1.5, 0 Lux (White LED on) |
| Shutter Speed | 1 / 2 to 1 / 10,000 sec. |
| S/N Ratio | More than 48dB (AGC off) |
| Lens | f3.8mm / F1.5 |
| Viewing Angle | 62.7° (Diagonal) / 53.7° (Horizontal) / 34.1° (Vertical) |
| White LED | YES (1W, 10 meters) |
| White Balance | ATW |
| AGC | Auto |
| IRIS Mode | AES |
| PIR Sensor | Detection Range 76 wide angle with up to 6m long distance at |
| 2m height (under 30 C) | |
| Micro SD Card Slot | YES (up to 64GB) |
| External Alarm I/O | YES |
| Microphone | YES |
| Speaker | YES |
| Power Source (±10%) | 12V / 1A |
| Operating Temperature | 0℃~40℃ |
| ▓ Others | |
| Mobile Surveillance | iPad / iPhone / Android mobile device |
| Quick Wireless Network Connection | YES |
| RTC (real-time clock) | YES |
| Motion Detection | YES |
| Digital Pan / Tilt / Zoom | YES |
| Event Notification | FTP / Email / Push Video |
| ‧Intel core i3 or higher, or equivalent AMD | |
| ‧2GB RAM | |
| Minimum Web Browsing Requirements | ‧AGP graphics card, Direct Draw, 32MB RAM |
| ‧Windows 7, Vista & XP, DirectX 9.0 or later | |
| ‧Internet Explorer 7.x or later |
